T
Joined: Nov 26, 2005
Posts: 5993
|
T
Looking good Cy!
I love to be a part of your carvings.
Hey check this out.
forstner bit
https://www.google.com/search?q=forstner+bit&espv=2&biw=1280&bih=637&tbm=isch&tbo=u&source=univ&sa=X&ei=3EyIVcaiIIulNvXsqIgD&ved=0CE0QsAQ
These come as large as 4 inch or more I think.
So what if you put a hole right behind that tiki in the carve out area, then carve out behind that
tiki from front to the hole, then you could put a light fixture behind that tiki and have the light wash
over that area from behind the tiki.
This would hide bulb so that all you would get is a nice glow.
The bulb would be changed from the bottom of tiki.
Look at the light I sent you with the cork.
This is how I would do the light on the bottom.
|
