Post #273227 by tikigap on Sun, Dec 17, 2006 4:18 PM

By the way - thanks for the sanding tips Tama - to keep this great info with the rest of the Stone Carving Thread, here's Tama's response when I exposed the errors of my ways, from my thread:

Quote from Tama:

A very good lesson & one that every stone carvers must learn by experience. It can be tempting to think 'oh, that big scratch will come out if I just keep going a bit further/longer': 9 times out of 10, you'd be better to back a stage & get it out with a heavier paper. Sometimes they're damnedly hard to see until youve moved on a grade too. Sux eh?

There is a product locally known as 'diamond cloth' (but possibly called something else in manufacturers terms?) available in strips or as continuous belts. This stuff acts as an intermediate step between carving with diamond coated tools & sanding with wet-dry/carborundum paper. A bit too course to be called an 'ever-lasting' sandpaper & a soft version of diamond cutting tools. It comes in many grades, right up to really fine 12,000 grit or something silly.
Its not cheap but is a must-have really. You can use it by hand or loaded onto revolving drums or burrs ( I usually take jade through 400 & 800 grit after shaping is finished).

Possibly something to look out for if you plan to do more stone work - which I encourage!

Tama