B
Benzart
Member
Port Saint Lucie, Florida
Joined: Jan 09, 2004
Posts: 10397
|
B
The Canoe, Solid log, yes, I cheated a little since I knew it was for display only If you look on the side about 4 inches from the bottom, there is anoticable long strip glued in. I Plunge cut from the top a rectangle around what is now the inside of the canoe. I stopped about 2 ' from the bottom, not going all the way thru.
Then from one side about 4 " form the bottom I plunged thru Almost all the way and cut out the bottom ok the rectangle. The piece lifted out and there was the canoe hollowed out. I cut a strip tto plug the hole in the side , sanded it , scr3ewed and glued it in.
I used the cutout piece for another carving so it was not wasted.
This may sound confusing, but what I did was cut out a 16" by 16" by 8' square log. I used scrap pieces for the pontoons and brackets.
Easy.
The fun part was during the bow shaping, this Peacock type imabe started to come out and really blew me away.
More to follow
|
